Epoxy garage floors for condos and townhomes in Broward
PompanoEpoxy coats garage floors for condos and townhomes across Broward, and the planning starts with the association. There are neighbors on a shared driveway, rules about contractor hours and a car that needs somewhere to go while the floor cures.


Example photos of finished floors, shown for the look. Not photos of a specific past job.
Do I need association approval to coat my garage floor?
Sometimes: even where the garage belongs to your unit, the association can set rules on contractor access, work hours and noise, so check before you book.
Condo and townhome documents in Broward vary a lot. In some buildings the garage or parking space is a limited common element, which gives the association a say in what is done to it. In others the garage is yours, but the gate, the driveway and the hours contractors can work are not. A quick question to the manager or the board before booking saves a stopped job.
Ask the manager first
Find out whether the work needs a form, which days and hours contractors may work, and where a work vehicle can park.
Noise and dust
Preparing a slab means grinding, which is loud. The schedule follows the community's quiet hours, and dust control matters with neighbors next door.
Product details for the file
Some boards want the product name and color on file. Ask for them with your quote so the paperwork is ready.
Where does the car go while the floor cures?
Plan for the garage to be out of use for the whole job plus the cure time, and line up a guest space or a spot on the driveway ahead of time.
In a townhome row the driveway is often shared or short, and guest spaces fill up. Sort out parking before the first day of work, and let the neighbors know there will be equipment near the garage for a while.
Guest parking
Some associations let you reserve a guest space or issue a temporary pass. Ask early.
Faster-curing topcoats
Polyaspartic topcoats cure faster than standard epoxy. How soon you can park still depends on the system and the weather, so ask for the schedule before work starts.
Why do garage floors peel in South Florida?
Usually because moisture coming up through the slab, or thin prep, breaks the bond; Broward's high water table and humid air make both more likely.
Ground-floor garages sit on a slab poured on grade. Moisture moves up through it, and a coating that traps that moisture blisters and lets go. A white, powdery bloom on the concrete, called efflorescence, is a sign that water and salts are moving through the slab. Moisture, dust and soft spots all change how much grinding and prep a floor needs.
White powder on the concrete
Efflorescence has to be cleaned off and its cause considered before anything is applied, or it pushes the coating up from below.
Old paint or sealer
Old paint or epoxy usually has to come off, and cracks are filled.
Hot tires
In summer a hot tire can lift a coating that never bonded properly. The answer is the bond, not a thicker coat.
What does an epoxy garage floor cost for a townhome in Broward?
Price depends on the floor, so ask about yours; the size, the condition of the slab, any old coating and the finish you pick are what move it.
Size
A one or two car garage, plus any storage area that is included.
Slab condition
Cracks, pitting, efflorescence and soft spots add prep.
Old coatings
Paint, sealer or failed epoxy has to come off first.
The finish
Flake, metallic, solid color, quartz or polished concrete, each with its own materials and steps.
Several units at once
If neighbors in the same building want their garages done too, ask about planning them together.
What does the job look like?
Start
Tell us about the garage and your community's rules, and ask for a quote.
Ground work
The surface is usually ground and repaired so the coating has something to grip.
Coat and cure
A coating system usually goes down layer by layer, then it needs time before use. Ask for the schedule before work starts, so you can plan parking.

Questions townhome and condo owners ask
How much does a townhome garage floor cost?
Price depends on the floor: the size of the garage, the condition of the slab, any old paint or coating that has to come off and the finish you choose all move it. If neighbors in the same building want theirs done too, ask about planning them together. The quote is free.
How long will the garage be out of use?
Most of the time goes into prep and letting each coat cure, and the weather changes how long curing takes. Ask for the schedule before work starts, so you can reserve guest parking, tell the neighbors on a shared driveway and plan where the car goes for each day of the job.
Which finish suits a townhome garage?
Flake hides dust and gives grip, so it is the practical pick for a garage that gets used every day. Metallic is more of a statement and shows dust more. Solid color is the simplest look, quartz adds texture, and polished concrete depends on the slab you start with.
Will the coating cover cracks and stains?
Cracks are filled and the surface is ground before coating, so most small cracks and stains disappear under the new floor. A flake finish hides small marks better than a solid color. A crack that keeps moving can show through any coating, so point out any that seem to be growing when you ask for a quote.