A floor with a flake epoxy finish

Epoxy garage floors in Lighthouse Point and Parkland

Lighthouse Point has waterfront homes with boats and wet gear, and Parkland has larger homes in strict communities with three-car garages. Both want a floor that looks right and works hard.

What does a waterfront garage need?

A floor that can be rinsed, resists salt and shrugs off wet gear, with texture for wet feet.

Homes on canals and the Intracoastal bring in wet lines, wet shoes and salt. A sealed floor rinses clean and does not soak up fuel or fish smells. Ask for grip near the door and wash area.

01

Rinsing

Fresh water keeps salt off.

02

Wet gear

Drips are easy to wipe from a coating.

03

Grip

Texture matters where it is wet.

Can I park or store a boat there?

A cured floor handles the weight, but trailer jacks and stands should sit on pads, since sliding metal is what marks a coating.

The load is rarely the issue. Scratches come from dragging metal. Use pads, lift rather than slide, and ask about a heavier topcoat if the garage is also a workshop.

01

Pads

Spread the load.

02

Dragging

Lift instead.

03

Fuel and oil

Wipe spills quickly.

What about large Parkland garages?

Plan for a bigger floor: sequencing, cure time and color all matter more, and a mid-tone flake hides wear over a large area.

Three-car garages and bonus bays give a big canvas. A well chosen blend ties the floor to cabinets and walls. Think about lighting, since a large garage can look very different under daylight and under lights.

01

Lighting

Check blends in daylight and under garage lights.

02

Cabinets

Match or contrast with built-ins.

03

Blends

Mid tones hide wear.

How strict are community rules?

Often strict about exteriors and hours, so confirm any needs before booking; a floor inside a closed garage is usually fine.

Parkland communities in particular can have detailed rules about contractors, vehicles and exterior changes. Call the manager early, ask about work hours and about the door being open, and keep a note of the answer.

01

Contractors

Some communities require notice.

02

Hours

Weekend limits are common.

03

Door

Ask about work with the door up.

What affects the cost of a large or waterfront garage?

Size, slab condition, finish and any extra texture or heavier topcoat you ask for; ask what the quote includes.

Larger floors and heavier-use garages take more material and more time. Salt on the slab, old coatings and cracks add prep. A heavier topcoat for a boat garage or workshop adds to the build. Ask for the details so you know what you are comparing.

01

Size

Three-car and bonus bays take more.

02

Prep

Salt, old coatings and cracks add work.

03

Topcoat

Heavier-use garages may want a tougher one.

How does a waterfront or large garage job go?

1

Describe the garage

Tell us the size, what you store and the community rules, and ask for a quote.

2

Prep

The slab is ground and repaired.

3

Coat

Base, flake and topcoat go down in planned sections.

4

Cure

The floor cures before boats and cars return. Ask for the schedule.

Finishes

Example of a coated floor being installed

Finish examples

FAQ

FAQ

Questions from Lighthouse Point and Parkland homeowners

Will salt hurt a coated garage floor?

A cured coating resists salt far better than bare concrete because it does not soak it up. Rinse with fresh water now and then. Salt left on the slab before coating can cause problems, so the crew should wash it off during prep. Ask how they handle it.

How do I protect the floor from a boat trailer?

Place pads or boards under jack stands and trailer feet, and lift rather than drag. A cured coating can take the weight. The scratches come from sliding metal. If the garage also serves as a workshop, ask about a tougher topcoat for the extra wear.

What if my community has strict rules?

Ask the manager before booking. Most associations only care about exteriors and contractor hours, but some want notice or limit weekend work. Get the answer in writing if you can. A coating inside a closed garage is rarely a concern, but the work itself can be.

Does a bigger floor change how it is coated?

It changes the planning more than the method. A large floor is coated in sections so edges blend, and it takes more time to cure and to clear. Think about where cars go and when. Ask the crew how they sequence big floors and handle the joins.

(754) 238-5576

When? (optional)
What? (optional)
CallGet a free quote