A bright, empty room with white walls, a large window and a polished concrete floor

Polished concrete floors in Pompano Beach

Polished concrete is your existing slab ground flat, hardened and polished to a sheen, with no coating on top to peel in the humidity. It suits showrooms, warehouses, offices and modern homes in Pompano Beach, and the slab you start with decides the look.

polished concrete reflecting a wall of windows
Example: polished concrete reflecting a wall of windows
a polished concrete floor in a bright room with tall windows
Example: a polished concrete floor in a bright room with tall windows
a slab after the first grinding pass, before it is polished
Example: a slab after the first grinding pass, before it is polished

Example photos of finished floors, shown for the look. Not photos of a specific past job.

What is polished concrete, and how is it different from a coating?

It is the slab itself, ground and polished, rather than a layer applied on top; there is nothing to chip, peel or lift, and the concrete underneath shows through.

Polishing works like sanding: coarse abrasives take off the top of the slab, finer passes remove the scratches of the ones before, and a liquid hardener soaks in partway through. The last passes set the shine, from satin to high gloss, and a stain guard goes on at the end.

Because no film sits on top, moisture coming up through the slab has nothing to push off. That is a real advantage in Broward, where a high water table makes moisture the most common reason floor coatings fail.

01

Grinding

Coarse abrasives flatten and open the surface, with a vacuum pulling in the dust.

02

Hardening

A liquid densifier soaks in and toughens the top of the slab.

03

Polishing

Finer passes bring up the sheen you choose: satin, semi-gloss or high gloss.

04

Stain guard

Applied last, so spills wipe up instead of soaking in.

Which Pompano Beach spaces suit polished concrete?

Indoor spaces that want a hard, bright, low-upkeep floor: boat and car showrooms, warehouses and shops, offices, retail and homes with an open plan.

Pompano Beach has plenty of all of these, from the industrial streets around the airpark to the marine businesses along the waterways. For a busy warehouse, polished concrete has no coating to wear through under forklifts. For a showroom, it reflects light and looks clean with very little upkeep.

01

Showrooms

Boats, cars and retail displays look sharp on a reflective floor that is easy to keep clean.

02

Warehouses and shops

Dust-resistant and hard-wearing, with nothing to peel under carts and forklifts.

03

Offices and retail

A modern look that cleans with a dust mop and an auto-scrubber.

04

Homes

Open-plan living areas and garages. Cool underfoot, with rugs where you want softness.

What if my home has terrazzo or old tile?

Terrazzo is a different floor from plain concrete and is restored with its own process, while tile, carpet glue and old coatings are ground off a concrete slab before polishing, and some marks may stay faintly visible.

Many older South Florida homes have terrazzo hiding under carpet or tile. If you pull up a corner and find speckled stone chips set in a smooth floor, that is terrazzo, and it is worth mentioning when you ask about your floor. If you find gray concrete, the question is what the slab looks like once the old flooring is gone: cracks, patches and glue lines can show through a polish, and many owners like that character.

01

Terrazzo

Stone chips set in a cement or resin base. Restored differently from concrete, so mention it up front.

02

Tile and carpet

Thinset, adhesive and tack strip holes come out in the grind. Faint shadows can remain.

03

Cracks and patches

Filled with a color-matched filler, but still visible as lines. For a uniform look, a coating may suit better.

What does polished concrete cost in Pompano Beach?

Price depends on the slab, so ask about yours; what has to come off it, its condition and the sheen and look you choose are what move it.

An empty slab in a new space is mostly polishing. A floor with tile, thinset or an old coating to remove is a bigger job before polishing starts.

01

What is on it now

Tile, adhesive, paint or an old coating to grind off.

02

Slab condition

Cracks, patches, chipped joints and soft spots.

03

Sheen and look

Higher gloss and more exposed stone take more passes.

04

Access

Furniture or stock to move, and work after hours in a busy space.

What does the job look like?

1

Start

Tell us about the space, what is on the floor now and the look you want, and ask for a quote.

2

Grind and harden

Old flooring and coatings usually come off, the slab is ground flat and the densifier goes on.

3

Polish and guard

Finer passes bring up the sheen, and a stain guard finishes the floor. Ask for the schedule before work starts.

Finishes

Example of a coated floor being installed

Finish examples

FAQ

FAQ

Questions about polished concrete

How much does polished concrete cost?

Price depends on the slab: what has to come off it, the cracks and patches it has, the sheen you want and how much of the stone in the concrete you want showing. An empty new slab costs less to polish than an old floor under tile. Ask about yours. The quote is free.

Is polished concrete a good choice in Florida humidity?

It is one of the better ones, because there is no coating on top for moisture to push off. Moisture coming up through the slab is the most common reason floor coatings blister and peel in Broward. A polished floor lets the slab breathe instead of trapping that moisture under a film.

Is polished concrete slippery?

Clean, dry polished concrete is generally no more slippery than other smooth hard floors, and a stain guard keeps it that way. Water, oil or sand on any smooth floor makes it slick, so spills get wiped up and entries get a mat. It is not used outdoors, where rain and pool water would make it unsafe.

Does polished concrete stain?

It resists stains well once it is hardened and guarded, but it is still concrete. Acidic spills such as wine, citrus juice and vinegar can etch the surface if they sit, so wipe them up quickly and clean with a pH-neutral cleaner rather than anything harsh. The guard can be renewed as it wears.

How do I take care of a polished floor?

Dust mop it often, because sand and grit are what dull the shine, and damp mop with a pH-neutral cleaner. Skip vinegar, bleach and wax. Busy commercial floors are cleaned with an auto-scrubber and buffed from time to time to bring the gloss back, without polishing the whole floor again.

(754) 238-5576

When? (optional)
What? (optional)
CallGet a free quote